Design and development of a low-cost imidazole-based hole transporting material for perovskite solar cells

Energy Adv., 2023, 2,1693-1701
DOI: 10.1039/D3YA00111C, Paper
Open Access Open Access
Fatemeh Sadeghi, Babak Pashaei, Babak Nemati Bideh, Negin Sabahi, Hashem Shahroosvand, Mohammad Khaja Nazeeruddin
Low-cost and facile synthesis routes of hole-transporting materials (HTMs) are promising approaches to minimize the total cost of perovskite solar cells (PSCs) on both laboratory and commercial scales.
The content of this RSS Feed (c) The Royal Society of Chemistry

The rotating disc electrode: measurement protocols and reproducibility in the evaluation of catalysts for the oxygen evolution reaction

Energy Adv., 2023, Advance Article
DOI: 10.1039/D3YA00340J, Paper
Open Access Open Access
Creative Commons Licence  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Marc F. Tesch, Sebastian Neugebauer, Praveen V. Narangoda, Robert Schlögl, Anna K. Mechler
Elaborated and uniform experimental protocols are a prerequisite for OER catalyst evaluation via RDE. Still, individual sample preparation and variations in microenvironment can lead to a significant spread of results between different laboratories.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry

Electrocatalytic behavior of amino compound oxidation on NiCo catalyst and energy conversion

Energy Adv., 2023, 2,1752-1760
DOI: 10.1039/D3YA00368J, Paper
Open Access Open Access
Wei Xu, Zhaozhao Yan, Chunhong Liu, Xu Yang, Hua Yu, Hongchao Chang, Jiarong Zang, Guangyao Xu, Linmin Du, Binbin Yu
Direct electricity is generated from amino compounds with different side chain groups via electrooxidation on a NiCo catalyst.
The content of this RSS Feed (c) The Royal Society of Chemistry

Semi-solid electrodes based on injectable hydrogel electrolytes for shape-conformable batteries

Energy Adv., 2023, Advance Article
DOI: 10.1039/D3YA00333G, Paper
Open Access Open Access
Mario Borlaf, Matias L. Picchio, Gisela Carina Luque, Miryam Criado-Gonzalez, Gregorio Guzmán-Gonzalez, Daniel Pérez-Antolin, Gabriele Lingua, David Mecerreyes, Edgar Ventosa
The use of hydrogels in a semi-solid electrode enables a new fabrication procedure for shape-conformable batteries.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry

A comparison of the impact of cation chemistry in ionic liquid-based lithium battery electrolytes

Energy Adv., 2023, Advance Article
DOI: 10.1039/D3YA00336A, Paper
Open Access Open Access
Creative Commons Licence  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Faezeh Makhlooghiazad, Colin S. M. Kang, Mojtaba Eftekharnia, Patrick C. Howlett, Oliver Hutt, Maria Forsyth, Luke A. O’Dell, Jennifer M. Pringle
Two high-salt-content ionic liquid electrolytes with distinct cationic chemistries were compared. The one with a phosphonium cation showed superior characteristics, particularly in terms of its enhanced capacity when used in lithium metal batteries.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry

Molybdenum sulfo-selenide nanocomposites with carbon nanotubes and reduced graphene oxide for photocatalytic hydrogen evolution reaction

Energy Adv., 2023, 2,1724-1734
DOI: 10.1039/D3YA00219E, Paper
Open Access Open Access
Creative Commons Licence  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Namsheer K, K. Pramoda, Kothanahally S. Sharath Kumar, Sithara Radhakrishnan, Chandra Sekhar Rout
We report a facile method for the preparation of nanocomposites of molybdenum sulfo-selenide (MoSxSe1−x) with carbon nanotubes (CNTs) and reduced graphene oxide (RGO) via a solvothermal approach.
The content of this RSS Feed (c) The Royal Society of Chemistry

Design and analysis of a SnS2/WS2/V2O5 double-heterojunction toward high-performance photovoltaics

Energy Adv., 2023, Advance Article
DOI: 10.1039/D3YA00231D, Paper
Open Access Open Access
Creative Commons Licence  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Jubair Al Mahmud, Md. Ferdous Rahman, Abdul Kuddus, Md. Hasan Ali, A. T. M. Saiful Islam, Md. Dulal Haque, Sheikh Rashel Al Ahmed, Muhammad Mushtaq, Abu Bakar Md. Ismail
Tungsten disulfide (WS2) transition metal dichalcogenide (TMDC) absorber-based solar cells comprising tin disulfide (SnS2) buffer and vanadium oxide V2O5, BSF layers have been designed and analyzed using a SCAPS-1D simulator in this study.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry

Generation of covalent organic framework-derived porous N-doped carbon nanosheets for highly efficient electrocatalytic hydrogen evolution

Energy Adv., 2023, 2,1713-1723
DOI: 10.1039/D3YA00325F, Paper
Open Access Open Access
Sayan Halder, Anup Kumar Pradhan, Soumen Khan, Chanchal Chakraborty
N-doped carbon nanosheets derived from triazine-containing polyimide-based covalent organic framework (TP-COF) exhibit outstanding electrocatalytic hydrogen evolution.
The content of this RSS Feed (c) The Royal Society of Chemistry

Photothermal catalytic C1 conversion on supported catalysts

Energy Adv., 2023, 2,1541-1564
DOI: 10.1039/D3YA00315A, Review Article
Open Access Open Access
Hui Liu, Liangliang Han, Xiaoguang Duan, Hongqi Sun, Shaobin Wang, Jinqiang Zhang
Photothermal catalysis is a promising method for converting C1 feedstocks into valuable chemicals. This comprehensive review highlights the mechanism, design strategies for catalysts, and recent progress in photothermal catalytic C1 conversion.
The content of this RSS Feed (c) The Royal Society of Chemistry