Expanding the Substrate Scope of N‐ and O‐Methyltransferases from Plants for Chemoselective Alkylation

Expanding the Substrate Scope of N- and O-Methyltransferases from Plants for Chemoselective Alkylation**

Chemoselective S-adenosyl-l-methionine (SAM)-dependent methyltransferases (MTs) are a promising alternative to traditional synthetic methylation reactions. In presence of multiple nucleophiles, the enzymatic transfer of the carbon fragment is highly chemoselective for N- and O-MTs. Besides methylation, the generation of SAM derivatives enables the transfer of altered groups onto the substrates increasing the pool of products.


Abstract

Methylation reactions are of significant interest when generating pharmaceutically active molecules and building blocks for other applications. Synthetic methylating reagents are often toxic and unselective due to their high reactivity. S-Adenosyl-l-methionine (SAM)-dependent methyltransferases (MTs) present a chemoselective and environmentally friendly alternative. The anthranilate N-MT from Ruta graveolens (RgANMT) is involved in acridone alkaloid biosynthesis, methylating anthranilate. Although it is known to methylate substrates only at the N-position, the closest relatives with respect to amino acid sequence similarities of over 60 % are O-MTs catalysing the methylation reaction of caffeate and derivatives containing only hydroxyl groups (CaOMTs). In this study, we investigated the substrate range of RgANMT and a CaOMT from Prunus persica (PpCaOMT) using compounds with both, an amino- and hydroxyl group (aminophenols) as possible methyl group acceptors. For both enzymes, the reaction was highly chemoselective. Furthermore, generating cofactor derivatives in situ enabled the transfer of other alkyl chains onto the aminophenols, leading to an enlarged pool of products. Selected MT reactions were performed at a preparative biocatalytic scale in in vitro and in vivo experiments resulting in yields of up to 62 %.

Nickel‐asparagine complex fixed on a magnetic substrate as a precursor for preparing substituted acridines

Nickel-asparagine complex fixed on a magnetic substrate as a precursor for preparing substituted acridines


In this work, an efficient, novel, retrievable, and magnetic heterogeneous nanocatalyst, Fe3O4@CPTMS@Asp@Ni was successfully fabricated using Fe3O4 nanoparticles as the core that were coated with surfactant and 3-chloropropyltrimethoxysilan and deposited asparagine and nickel metal that can be used in multicomponent reactions for the synthesis of acridines derivatives with high yield in short reaction times. The virtue of obtained nanocatalyst was identified using transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction analysis, energy dispersive X-ray, Brunauer–Emmett–Teller, vibrating sample magnetometry, Raman, and thermogravimetric analysis. The X-ray diffraction analysis studies demonstrate that the average crystallite sizes of the prepared nanocatalyst are estimated to be about 45.4 nm. Also, the vibrating sample magnetometry measurement shows saturation magnetization values (Ms) of 7 emu/g for Fe3O4@CPTMS@Asp@Ni nanocatalyst. Also, after the synthesis steps, the application of the prepared nanocatalyst in the preparation of acridine-1,8(2H,5H)-diones has been investigated. Then to evaluate and assess the efficiency of the nanocatalyst as mentioned above, and its effect on the synthesis of divergent acridines via a one-pot, three-component condensation reaction of cyclic 1,3-dione, aryl glyoxal, with ammonium acetate in the water as green solvent was studied. Also, when investigating the reusability of this catalyst, it was observed that Fe3O4@CPTMS@Asp@Ni nanocatalyst could be reused at least five times without losing its efficiency. High efficiency, outstanding yields in quick intervals, easy separation using a magnetic field, and possessing reusability are significant benefits of the attained nanocatalyst.

Surface/Interface Engineering of Hierarchical MoO2/MoNi4@Ru/RuO2 Heterogeneous Nanosheet Arrays for Alkaline Water Electrolysis with Fast Kinetics

Comprehensive Summary

Realizing the hydrogen economy by water electrolysis is an attractive approach for hydrogen production, while the efficient and stable bifunctional catalysts under high current densities are the bottleneck that limits the half-cell reactions of water splitting. Here, we propose an approach of hydrothermal and thermal annealing methods for robust MoO2/MoNi4@Ru/RuO2 heterogeneous cuboid array electrocatalyst with multiplying surface-active sites by depositing a monolayer amount of Ru. Benefiting from abundant MoO2/MoNi4@Ru/RuO2 heterointerfaces on Cu foam, effectively driving the alkaline water splitting with superior hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The synthesized MoO2/MoNi4@Ru/RuO2 has high HER activity, which realizes the working overpotentials of 48 mV at 50 mA cm-2, further achieving overpotentials of 230 mV for industry-level 1000 mA cm-2 in alkaline water electrolysis. Moreover, it also showed an enhanced OER activity than commercial RuO2 with a small overpotential of 280 mV at 200 mA cm-2 in alkaline media. When building an electrolyzer with electrodes of (-)MoO2/MoNi4@Ru/RuO2IIMoO2/MoNi4@Ru/RuO2 (+), a cell voltage of 1.63 V, and 1.75 V just requires to support the current density of 200 mA cm-2 and 500 mA cm-2 in alkaline water electrolysis, much lower than the electrolyzer of (-)Pt/CIIRuO2(+). This work demonstrates that MoO2/MoNi4@Ru/RuO2 heterogeneous nanosheet arrays are promising candidates for industrial water electrolysis applications, providing a possibility for the exploration of water electrolysis with a large current density.

This article is protected by copyright. All rights reserved.

Selective Cleavage of Methylene Linkage in Kraft Lignin over Commercial Zeolite in Isopropanol

Lignin is an aromatic polymer that constitutes over 30 wt% of lignocellulosic biomass and is the most important source of renewable aromatics in nature. The global paper industry generates more than 130 million tons of Kraft lignin annually. Depolymerization of Kraft lignin to value-added monomers can significantly enhance the profitability of biorefinery. However, the method is impeded by the severe condensation of Kraft lignin during the pulping process, which forms robust C-C bonds and results in low monomer yields. In this study, we present a stepwise approach for producing valuable aromatic monomers from Kraft lignin through cleavage of both C-O and C-C bonds. The approach initiated with complete cleavage of C-O bonds between lignin units within Kraft lignin through alcoholysis in isopropanol, resulting in a monomer yield of 8.9%. Subsequently, the selective cleavage of methylene linkages present in the residual dimers and oligomers was achieved with commercial MCM-41 zeolite in the same pot, proceeding with an additional monomer yield of 4.0%, thereby increasing the total monomer yield by 45%. This work provides an avenue for increasing the depolymerization efficiency of Kraft lignin.

Closing the Gap: Towards a Fully Continuous and Self‐Regulated Kolbe Electrosynthesis

In this article, we address the transition of the Kolbe electrolysis of valeric acid (VA) to n-octane as an exemplary electrosynthesis process from a batch reaction to a continuous, self-regulated process. Based on a systematic assessment of chemical boundary conditions and sustainability aspects, we propose a continuous electrosynthesis including a simple product separation and electrolyte recirculation, as well as an online-pH-controlled VA feeding. We demonstrate how essential performance parameters such as product selectivity (S) and coulombic efficiency (CE) are significantly improved by the transition from batch to a continuous process. Thus, the continuous and pH-controlled electrolysis of a 1M valeric acid, starting pH 6.0, allowed a constantly high selectivity of around 47% and an average Coulomb efficiency about 52% throughout the entire experimental duration. Under otherwise identical conditions, the conventional batch operation suffered from lower and strongly decreasing performance values (Sn-octane, 60min= 10.4%, Sn-octane, 240min= 1.3%; CEn-octane, 60min=7.1%, CEn-octane, 240min= 0.5%). At the same time, electrolyte recirculation significantly reduces wastes and limits the use of electrolyte components.

Carbon Nitride with Single‐Atom Nickel as Co‐Catalyst for Visible‐Light Promoted C—O Coupling

Carbon Nitride with Single-Atom Nickel as Co-Catalyst for Visible-Light Promoted C—O Coupling†

A nickel single-atom heterogeneous photocatalyst was prepared and employed in visible-light-driven C—O cross-coupling reactions under mild conditions, which exceeded the catalytic activity of a semi-heterogeneous catalytic system. The reaction system exhibited good isolated yields for a broad range of aryl bromides (e.g., ketones, aldehydes, esters, and amides) and both primary and secondary alcohols. Experimental characterizations showed that nickel single atoms could facilitate C—O cross-coupling by extending the visible absorption range, improving the charge transfer, and inhibiting the recombination of carriers.


Comprehensive Summary

Solar-driven cross-coupling reactions by dual nickel/photocatalysis under mild conditions have received considerable attention. However, the existing photo/nickel dual catalytic cross-coupling reactions require the addition of expensive photosensitizers and organic ligands, and the catalytic activity is inadequate. Herein, we report a nickel single-atom heterogeneous catalyst supported on mesoporous carbon nitride for photocatalytic C—O coupling reaction between 4-bromobenzonitrile and ethanol, affording 4-ethoxybenzonitrile in excellent yield compared to a semi-heterogeneous catalytic system. The catalytic system exhibits a broad substrate scope including ketones, aldehydes, esters, and amides. This work presents a simple and cost-effective strategy for anchoring metal single atoms onto carbon nitride, providing a new platform for enabling high-performance photocatalytic production of aryl ether compounds.

Alternating Copolymerization of Epoxides and Isothiocyanates to Diverse Functional Polythioimidocarbonates and Related Block Polymers

Alternating Copolymerization of Epoxides and Isothiocyanates to Diverse Functional Polythioimidocarbonates and Related Block Polymers†

We study the organoboron catalyzed ring-opening copolymerization of epoxides and isothiocyanates and the performance of the resultant polythioimidocarbonates. Copolymerizations only take place on free -OC(=N)S, and excess TEB or intramolecular synergy are adverse. Additionally, aromatic isothiocyanates polymerize much faster than aliphatic ones, which facilitated the one-step synthesis of block polymers from mixed monomers. This protocol can deliver sulfur-containing polymers with both high T g and refractive index. Moreover, polythioimidocarbonates can also serve as positive resists for electron beam lithography.


Comprehensive Summary

Synthesis of diverse polythioimidocarbonates via ring-opening copolymerization of epoxides and isothiocyanates catalyzed by organoboron catalyst was reported herein. Both aromatic and aliphatic isothiocyanates underwent successful copolymerization with terminal and internal epoxides, allowing for the precise tuning of the performance of the resultant copolymers over a broad range. The wide scope of available isothiocyanates and epoxides enables the direct construction of sulfur-containing functional polymers featuring both high glass transition temperature and refractive index. Additionally, it was observed that aromatic isothiocyanates polymerize much faster than aliphatic ones, and the reactivity difference facilitated the one-step synthesis of block polymers from mixed aromatic isothiocyanates, aliphatic isothiocyanates and epoxides due to the preferential incorporation of aromatic isothiocyanates over the aliphatic analogues during their alternating copolymerization with epoxides. The produced polythioimidocarbonates can be used as positive resists for electron beam lithography (sensitivity of 130 μC/cm2 and contrast of 1.53 for poly(CHO-alt-EITC)). Coupling with their high refractive index (1.58—1.68), polythioimidocarbonates might find functional applications in optics. These results render ring-opening copolymerization of epoxides and isothiocyanates a facile route to enrich functional polymer library.

The Potential Game Changer: a Concept‐to‐Proof Study on D:A Heterojunction‐Free Organic Photovoltaics

Comprehensive Summary

Since 1986, the donor-acceptor (D:A) heterojunction has been regarded a necessity for high-efficiency organic photovoltaics (OPVs), due to its unique advantage in compensating the intrinsic limitations of organic semiconductors, such as high exciton binding energy and poor ambipolar charge mobility. While this adversely causes tremendous non-radiative charge recombination and instability issues, which currently become the most critical limits for commercialization of OPVs. Here, we present a concept-to-proof study on the potential of D:A heterojunction free OPV by taking advantage of recent progress of non-fullerene acceptors. First, we demonstrate that the “free carriers” can be spontaneously generated upon illumination in an NFA, i.e. the 6TIC-4F single layer. Second, the 6TIC-4F layer also exhibits good ambipolar charge transporting property. These exceptional characteristics distinguish it from the traditional organic semiconductors, and relieve it from the reliance of D:A heterojunction to independently work as active layer. As a result, the subsequent OPV by simply sandwiching the 6TIC-4F layer between the cathode and anode yields a considerably high power conversion efficiency ~ 1%. Moreover, we find the D:A heterojunction free device exhibits two order of magnitude higher electroluminescence quantum efficiency and significantly reduced VOC loss by 0.16 eV compared to those of the D:A BHJ structure, validating its promise for higher efficiency in the future. Therefore, our work demonstrates the possibility of using D:A heterojunction-free device structure for high performance, that can potentially become the next game changer of OPV.

This article is protected by copyright. All rights reserved.

Enhancing the Circularly Polarized Luminescence of Self‐Assembled Cyanostilbenes through Extended π‐Conjugation

Main observation and conclusion

Chiral supramolecular assembly of π-conjugated luminophores provides a promising avenue for enhancing circularly polarized luminescence. In this study, we shed light on the impact of π-conjugation length on circularly polarized luminescent performance of the resulting supramolecular assemblies, by designing a tetra-cyanostilbene monomeric compound alongside two dicyanostilbene control compounds. These cyanostilbene-based compounds possess the ability to form chiral supramolecular polymers in toluene, driven by a synergistic combination of intermolecular hydrogen bonding and π–π stacking interactions. The extended π-aromatic skeleton brings bathochromic-shifted fluorescence and enhanced intermolecular stacking capability for the tetra-cyanostilbene compound. Consequently, chiral supramolecular assemblies formed by the tetra-cyanostilbene compound demonstrate a remarkable two-fold increase in g lum values relative to the assemblies formed by the dicyanostilbene compounds. Overall, this study provides valuable insights into the relationship between π-conjugation length and the circularly polarized luminescent performance of π-conjugated supramolecular assemblies.

This article is protected by copyright. All rights reserved.